2. IP addresses are handed out by the DHCP server, which on an internet connection is the ISP. If the ISP supports static IPs over their cellular networks then you'll be able to do this. If you try doing this from the client side without appropriate configuration upstream on the provider side, you won't get internet. Simply type ip neigh in terminal and you should see an output showing connected devices' ip addresses as well as mac address (but it looks a bit cluttered though) See screenshot: Screenshot (click image for larger variant) The information in the terminal output includes : IP address of connected client. Here is how you can modify the default IP address range that is assigned to the second NIC when the Internet Connection Sharing is enabled on the LAN card that is connected to the direct Internet line: Log on to the computer with the administrator account. After logging on, press the Windows + R keys simultaneously to initialize the Run command There is a strong cell signal so the thought it a cell based hotspot that casts WiFi tot he store. That needs a static IP though for the POS system. Gotcha. Yes there are 4g hotspots that can do this. I can't recommend any though, because the mods here are inanely strict about banning you for that. To change the IP address that is assigned to the host and the IP address range that is used by the DHCP service on the Connection Sharing host, use Registry Editor to change the following values. These values are located in the following folder: HKLM\System\CurrentControlSet\services\SharedAccess\Parameters . On previous phones there was always a setting to configure the default ip address range and subnet for client DHCP. This does not seem to be the case for Samsung S5. Am i missing something, or is that configuration option no longer available? My phone has settings of 192.168.43/24 with ip addresses assigned starting from 192.168.43.192. When you get to your new location, select Set up wireless network, select the appropriate router from the list of devices, enter the password, and connect to the network. When you return home and plug in your Xbox, you won't automatically connect to your network, because establishing the new connection wiped out your home router's information. Changing WiFi password of Airtel 4G Hotspot- The Final Step. Once you are Logged in, click on Settings → WLAN → WLAN Basic Settings. On the WPA Pre-shared key field, your wifi password is written. Now delete whatever written under that field and write your new WiFi password there and click on Apply button. Now connect your devices with the Wait 5 minutes. set up the app “HeliumGeek”. in the app, click on your miner. There is a status called “port access”. if any other status than “reachable”, click on it and select to update the IP. enter your new external IP and the port 44158. Update might take 20 min Or longer. You can check in the Heliumgeek app. If you enter or change the hotspot password, make sure you rename the hotspot also before activating. Sometimes Windows need a "repair" on the WiFi menu to get a correct IP address. If your carrier blocks your tether usage in WiFi mode, try to use USB mode instead in PdaNet+ and set Hide Tether Usage to Level I.

how to change hotspot ip address